Programming Buttons; Optional Functions - Vertilux Vti 025 Serie Manual De Programación

Initial programming sequence
Before starting...
It is extremely important to charge battery motors for at least 8 hours on initial charge, prior to
installation.
1
Select the desired remote control and channel.
2
Pair the motor with the remote control.
3
Check the direction of rotation of the motor
and change it if needed.
4
Set the upper limit.
The upper limit must always be set first.
5
Set the lower limit.

Programming Buttons

Optional functions

• Setting intermediate limits
•
Erasing an intermediate limit
•
Readjusting the lower or
an intermediate limit
•
Setting the motor into "sleep mode"
• "Waking up" the motor
ITEM NUMBERS:
6 700 CM 24E04
6 700 CM 25E10
ITEM NUMBER:
6 700 AT C1RXX
•
•
•
•
•
© 2021. Vertilux, Ltd. All Rights Reserved. Last revised: May 2021.
Adding an additional remote or
"cloning" a channel
Changing to tilt or jog mode
Deleting a single motor or channel
Deleting all channels
Resetting the motor to factory default
UP OR
DOWN?
ITEM NUMBER:
6 700 CM 35EB6
ITEM NUMBER:
6 700 AT CRWXX
vertilux.com
2