Publicidad
Idiomas disponibles
Idiomas disponibles
Verify that both terminals are bridged
Press the button that corresponds to the desired operating mode:
+
-
Press and hold button ( ), and press button ( ) repeatedly until the display
shows
. Then release button ( ).
To access a specific function, press button ( ) repeatedly, and the display
will show the different functions available in the following sequence:
Adjustement of opening speed, per leaf:
from (0)=40 cm/s to (9)=100 cm/s (Bravo);
from (0)=40 cm/s to (6)=80 cm/s (Activa+)
Adjustment of closing speed, per leaf: from (0)=15cm/s to (9)=40 cm/s.
Adjustment of closing force: from (0)=40N to (9)=150N.
Adjustment of hold-open time: from (0)=0,0s to (9)=9,9s.
Adjustment of closing countdown: from (0)=0,0s to (9)=99,9s
Adjustment of inside radar sensitivity: from (0)=1 to (9)=25
(Bravo operator with PWM radar or Planar radar only)
Adjustment of outside radar sensitivity: from (0)=1 to (9)=25
(Bravo operator with PWM radar or Planar radar only)
Self-adjustment for Bravo operator (all versions) and Activa+ (from v.523
onwards).
Language selection
Selection between reduction opening or pharmacy opening
(operating modes only available from the remote control)
Delete all authorized remote controls
Remote control synchronization (max. 4)
EXIT the Technical Service functions
-
+
B
A
AUT
Operating mode only available on
the Bravo operator equipped with
an automatic lock
Press button ( ) repeatedly until the display shows the desired function.
Then press button ( ) to confirm.
The actual value of the parameter will be shown on the left digit of the display,
represented by a number between 0 and 9.
Press button ( ) repeatedly until the desired value is shown. Then press
button ( ) to confirm your selection
For Bravo operator (all versions) and Activa+ (from v.523 onwards).
Press button ( ) repeatedly until
to start the self-adjustment.
on Bravo operators, make sure that the door leaves are in close position
before running the self-adjustment. .
Press button ( ) repeatedly until
The code of the current language appears on left digit of the display,
represented by a number between 0 and 7:
Spanish
French
English
German
Italian
Press button ( ) repeatedly until the value of the desired language is shown.
Then press ( ) to confirm your selection
Press ( ) repeatedly until
The code of the current configuration appears on left digit of the display,
represented by a number between 0 and 6:
Pharmacy opening
Reduction opening 1
Reduction opening 2
Reduction opening 3
Press ( ) repeatedly until the desired option is displayed. Then press ( )
to confirm your selection.
After programming the desired configuration, you may select any of these
operating modes from the Remote Control or the Optima Selector.
- From the remote control (optional): press
- From the Optima selector:
- If the Pharmacy opening has been enabled (Bravo op. only):
Press and hold ( ), then press
- If the Reduction opening has been enabled:
Press and hold ( ), then press
To disable both modes (Pharmacy and Winter reduction opnenings) select any
other operating mode on the remote control or the Optima selector.
02
M
EN
appears on the display. Then press
appears on the display. Then press
Portuguese
Dutch
Catalan
appears on the display. Then press ( ).
Reduction opening 4
Pharmacy and reduction
opening disabled
Reserved.
+
-
AUT
EMSM03
.
Publicidad
