Operación - Electrolux ERFD59G3MLS Manual De Instrucciones

21 electrolux operación
Operación
Introducción a las funciones del refrigerador
Modelos con maquina de hielo manual
10 14
1
2
3
12 13 11
Botones de control
1
Control de temperatura del refrigerador y
del congelador
Turbo refrigeración y congelación
2
Modo Eco
3
Elementos de exhibición
6 Ícono enfriamiento rápido
7 Ícono congelamiento rápido
8 Ícono ahorro de energía
9
Ícono bloqueo
10
Ícono compartimiento del refrigerador
All manuals and user guides at all-guides.com
15 7 6
4
5
16 8 9
4
Ajuste de temperatura (+ o -)
5
Bloqueo del panel
6
Ícono compartimiento del congelador
11
Indicador del refrigerador
12
Indicador del congelador
13
14 Ícono de apagado: significa que el
refrigerador no está encendido
Temperatura del refrigerador
15
Temperatura del congelador
16
Taking-out and installation of the
lower freezer drawer
1. Pull out the lower freezer drawer
first.
2. Take out the two fixed screws from
the partition plate of the lower
freezer drawer with screw driver
and then take off the partition plate.
3. Take off the rear stopper for the
lower drawer as shown by Fig. A.
4. Take out the lower drawer body
with force as directed by the arrows
in Fig. B.
5. The installation of the lower drawer
body is conducted in the reverse
order. You should install the lower
drawer body first and then install
the rear stopper for the lower
drawer as shown in Fig. C. Finally,
both sides of the drawer shall be
connected to the position shown by
the arrows respectively.
6. The partition plate is installed into
the corresponding slots and then is
fixed with screws. The position of
the partition plate for the lower
drawer could be adjusted
according to your preference.
Don't remove the lower freezer drawer
if not necessary.
installation electrolux 42
Rear stopper for the lower drawer
Lower drawer body
Partition plate for the
lower drawer
Align with the slot
Insert into
the edge
Align with
the slot
Positioning hole for
the partition plate