MOB MO9769 Manual Del Usuario página 3

bank. Make sure the computer is on to begin charging the
portable Power bank.
2. Charging mobile phones and other electronic devices with
USB output.
a) The portable power device has a USB output port which has
the maximum output current of 2100 mAh.
b) Connect to USB cable to your mobile phone/device using the
appropriate connector. Connect the other end of the USB
cable to the OUT port of the portable Power bank. Your mobile
phone/device should display the status of charging.
c) Remove the USB cable from your mobile device when it is fully
charged.
3. Charging mobile phones and other electronic devices with
wireless output. To use the wireless charging mode the
mobile device needs to be a Qi-enabled device. If necessary,
enable wireless charging in the settings of your mobile device.
Next, simply stick your device to the wireless charging area and
the wireless charging will start
Note: In order to charge device, use only accessory cable
(provided with power bank) or the cable included with your own
device by the manufacturer.
Important safety precaution
1. Read all the instructions before using the product.
2. Power bank main unit contains an internal lithium ion battery.
Upon initial use or after a prolonged storage period, fully
charge it once. The unit's full performance is achieved only
after 2 or 3 completed charge and discharge cycles.
3. Power banks are not allowed in checked in luggage on
commercial airline flights. Handle with care and dispose in
accordance with local regulations. Carry-on only.
4. To reduce the risk of injury, close supervision is necessary,
when the product is used near children.
5. Do not put fingers or hands into the product.
6. Do not expose power bank to rain or water.
WARNING – When using this product, basic precautions
should always be followed, including the following:
7. Use of a power supply or charger not recommended or sold by
power pack manufacturer may result in a risk of fire or injury to