Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
5450030-Schrauber-man_a 24.03.11 16:11 Seite 67
fresh air and, if you have any
symptoms, consult a doctor. These
vapours may irritate the respiratory
system.
6 – Safety instructions relating
specifically to the equipment
• Use the appliance, the charger and the
attachments, only for their intended
applications!
• Before laying the stick screwdriver
aside, ensure that all moving parts
have come to a standstill.
• Avoid frequent blocking when drilling,
tightening or loosening screws.
• Connect the charger only to a 230 V
AC power supply.
• Charge the screwdriver battery only
with the charger supplied.
• Protect the charger and the screwdriver
from contact with moisture. Never
immerse in water!
• Do not use the charger in the open air.
• To avoid damage to the batteries,
never expose them to temperatures of
over 50 °C.
CAUTION! Do not short-circuit the
contacts of the battery or charger.
• When charging, ensure that the
device is correctly connected („+/–").
• Do not attempt to burn the
battery.
• The connection cord cannot be
replaced. In case of damage, dispose
of the device in the correct manner. In
case of damage, dispose of the
device in the correct manner.
Safety marking
The symbols on the housing mean the
following:
Type designation
Do not dispose of with
domestic waste!
Important! Observe
operating instructions!
„Tested Safety" voluntary
quality mark
CE Mark (conformity to
European safety standards)
Safety standard mark for
Croatia
7 – Charging the battery
This MeisterCraft MAS 36B LIO
battery-powered screwdriver may only
be charged using the XR-DC 060 300
mains adapter unit. The mains adapter
unit may only be operated with a
power supply that has an alternating
current of 220-240 V and a frequency
of 50/60 Hz. The use of any other
mains adapter units or the use of the
XR-DC 060 300 with another type of
power supply may lead to personal
and property damage.
67
Publicidad
Capítulos
Tabla de contenido
