Kit Assembly - Metra 95-3310B Instrucciones De Instalación

Double DIN radio provision
1. Slide the radio brackets into the
trim plate aligning the holes in
the trim plate to the clips on the
brackets. (Figure A)
2. Slide the Double DIN radio into
the bracket/trim plate assembly
and secure the Double DIN radio
to the assembly using the screws
supplied with the radio (Figure B)
3. Locate the factory wiring harness
and antenna plug in the dash.
Metra recommends using the
proper mating adapters from Metra
and/or AXXESS.
4. Mount the new radio assembly into
the dash and reassemble dash in
reverse order of disassembly.

Kit Assembly

(Figure A)
95-3310B
(Figure B) (Figure B)
3