Product Description And Specifications; Intended Use; Product Features - Bosch 0 607 661 505 Manual De Instrucciones

OBJ_BUCH-1993-003.book Page 18 Monday, March 17, 2014 4:39 PM
18 | English
 When universal rotary couplings (bayonet couplings)
are being used, retaining pins are required. Use Whip-
check hose restraints to protect against failed hose
connections or the connection between hose and pneu-
matic tool.
 Never carry the pneumatic tool by the hose.
 If you want to operate the pneumatic tool in a suspen-
sion device or a clamping fixture, take care to fasten it
in the device/fixture first before connecting it to the air
supply. This measure prevents accidental starting of oper-
ation.
Symbols
The following symbols could have a meaning for the use of
your pneumatic tool. Please take note of the symbols and
their meaning. The correct interpretation of the symbols will
help you to use the pneumatic tool in a better and safer man-
ner.
Symbol Meaning
 Before installing, operating, re-
pairing, maintaining and replacing
accessories as well as prior to
working near by the pneumatic
tool, please read and observe all in-
structions. Failure to follow the fol-
lowing safety warnings and instruc-
tions may result in serious injury.
 Wear safety goggles.
W Watt
Nm Newton metre
kg Kilogram
lbs Pounds
mm Millimetre
min Minutes
s Seconds
Revolutions or motions per
-1
min
minute
bar bar
psi pounds per square inch
l/s Litres per second
cfm cubic feet/minute
dB Decibel
3 609 929 C69 | (17.3.14)
Symbol
QC

UNF
G
NPT
R
L
Product Description and Specifica-
tions
While reading the operating instructions, unfold the fold-out
page with the illustration of the pneumatic tool and leave it
open.

Intended Use

The pneumatic tool is intended for driving in and loosening
screws as well as for tightening and loosening nuts within the
given dimension and power range.
Power output

Product Features

Unit of energy
The numbering of the product features refers to the illustra-
(torque)
tions on the graphics page. The illustrations are partly sche-
matic and may differ from your pneumatic tool.
Mass, weight
1 Tool bit
Length
2 Tool holder
Time period, 3 Housing with impulse mechanism
duration
4 On/Off switch
5 Air outlet with silencer
No-load speed
6 Hose fitting
7 Connection socket at air intake
Air pressure
8 Locking screw
9 Fastening slots for utility clip
Air consumption
10 Switch for direction of rotation (right / left rotation)
11 Clamping area (collar)(e. g. for an auxiliary handle)
Unit of relative
loudness
12 Auxiliary handle*
13 Sleeve of the quick-change chuck
14 Utility clip
15 Spacer block
16 Hose clamp
17 Exhaust-air hose
Meaning
Quick-change chuck
Symbol for hexagon socket
Symbol for external drive
Tool holder
US fine thread
(Unified National Fine
Thread Series)
Whitworth thread
Connecting thread
National pipe thread
Right rotation
Rotational direction
Left rotation
Read all safety warnings and all instruc-
tions. Failure to follow the warnings and in-
structions may result in electric shock, fire
and/or serious injury.
Bosch Power Tools