Tripp-Lite DWM1742MA El Manual Del Propietario página 8

5. Hook the Display onto the Wall Mount
• Using an assistant or mechanical lifting equipment, lift the display with attached VESA plate. Set the VESA
plate's upper thumbscrew over the top flange of wall plate arm. Make sure the VESA plate's lower screw fits
inside of the wall plate arm's lower hole.
• Position a level on the horizontal and vertical sides of the display and adjust as needed.
• Reattach the lower thumbscrew to the VESA mount (removed in step 1). Tighten both thumbscrews.
14-03-249-93332F.indb 8
8
4/14/2014 10:48:33 AM