Cable Management - Tripp-Lite DWM1742MA El Manual Del Propietario

6. Cable Management

Attach Cable Clip to
the wall-mount arm
using the provided
M4X5 screw.
Cable Clip
M4X5
Connect cables to your display and route cables through cable clip, then attach the cable cover to hold the cable
in place.
Note: Leave slack in cable for cantilever arm movement.
You may need to slightly loosen or tighten the adjustment screw using the supplied Hex Key depending on the
weight of display installed.
14-03-249-93332F.indb 9
Cable Cover
9
Hex Key
4/14/2014 10:48:35 AM