About This Document; General Safety Precautions - STEINEL L 600 CAM Manual Del Usuario

GB
1� About this document
Please read carefully and keep in a
safe place�
– Under copyright. Reproduction either
in whole or in part only with our
consent.
– Subject to change in the interest of
technical progress.
Symbols
!
Hazard warning!
Reference to other
information in the document�
...
2� General safety
precautions
Disconnect the power supply
!
before performing any work
on the unit�
• During installation, the electric power
cable being connected must not be
live. Therefore, switch off the power
first and use a voltage tester to make
sure the wiring is off-circuit.
• Installing the camera light involves
work on the mains voltage supply.
This work must therefore be carried
out professionally in accordance
with national wiring regulations and
electrical operating conditions. ( e.g.
DE- VDE 0100, AT- ÖVE / ÖNORM
E8001-1, CH- SEV 1000 )
• Only use genuine replacement parts.
• Repairs may only be made by spe-
cialist workshops.
3� L 600 CAM
Proper use
– Sensor-switched light with integrated
camera and intercom system for
installing on outdoor walls
The L 600 CAM features a camera with
memory card and intercom system.
Both functions can also be controlled
via an app.
A passive motion detector is integra-
ted in the L 600 CAM. The integrated
high-performance infrared sensor
detects the invisible heat radiated
from moving objects ( people, animals,
etc. ). The heat detected in this way is
converted electronically into a signal
that switches the light ON automatically.
Heat is not detected through obstacles,
such as walls or panes of glass. Heat
radiation of this type will, therefore, not
trigger the sensor.
Important:
The most reliable way of detecting
motion is to install the camera light with
the sensor aimed across the direction in
which a person would walk and by en-
suring that no obstacles ( such as trees
and walls, for example ) obstruct the line
of sensor vision. Reach is limited when
walking directly towards the light.
Package contents ( Fig� 3�1 )
– Camera light
– Four screws
– Four wall plugs
– Reset key
– Torx spanner
Product dimensions ( Fig� 3�2 )
13