STEINEL L 600 CAM Manual Del Usuario página 16

Android
iOS
Note:
The camera light needs a stable Wi-Fi
connection. The smartphone or tablet
used must have access to the
Internet and be connected to the same
Wi-Fi network as the camera light for the
installation process.
Installation
• Download app.
• The camera light is ready for configu-
ration as soon as the power supply is
switched ON. A signal sounds every
4 seconds during configuration.
• The signal sounds once a second
while the camera light is being
connected to the smartphone or
tablet.
• Now enter the network name and
password of the Wi-Fi router into
your app.
Camera function
When the camera is connected to a
smartphone or tablet, it is disabled for
external access. A QR code is generated
on the smartphone or tablet which can
be read by another smartphone or tablet.
• Once the sensor has triggered, you
will receive a push notification via
the app.
• Open the app. You can now use the
image display and intercom system.
The camera films a sequence when the
sensor has been triggered. The filmed
sequence is saved on the memory
card and can be retrieved at any time.
The recorded data is only saved on the
camera light's memory card.
Note:
You will find further information on the
functions and setting options in the app.
Twilight setting
The chosen response threshold can be
infinitely varied from 10 to 10,000 lux.
Time setting
The time you wish light to stay ON
for can be set to 1 minute, 3 minutes,
10 minutes or 15 minutes. Any move-
ment detected before this time elapses
will restart the timer.
Night light
The night-light function provides illumi-
nation at 0% to 40% light output when
ambient light falls below the light-level
setting.
15