Maintenance And Care; Declaration Of Conformity; Manufacturer's Warranty - STEINEL L 600 CAM Manual Del Usuario

Changing the memory card
• Undo retaining screw and remove
cover ( Fig� 6�1 )
• Insert memory card ( Fig� 6�2 )
• Fit cover and tighten retaining screw
( Fig� 6�4 )
Restoring factory settings
• Press the reset button for approx.
7 seconds ( Fig� 6�3 )
Note:
Pressing the reset button with the key
will return the camera light to factory
settings.
Once the light has been reset,
an acoustic signal will sound every
4 seconds.
• Fit cover and tighten retaining screw
( Fig� 6�4 )
7� Maintenance and care
The camera light requires no main-
tenance.
Weather conditions may affect the way
the camera light functions. Strong gusts
of wind, snow, rain or hail may cause the
light to come ON when it is not wanted
because the sensor is unable to distin-
guish sudden changes of temperature
from sources of heat. Detector lens and
camera lens may be cleaned with a damp
cloth if they get dirty ( do not use cleaning
agents ).
8� Disposal
Electrical and electronic equipment,
accessories and packaging must be re-
cycled in an environmentally compatible
manner.
Do not dispose of electrical
and electronic equipment as
domestic waste.
EU countries only:
Under the current European Directive on
Waste Electrical and Electronic Equip-
ment and its implementation in national
law, electrical and electronic equipment
no longer suitable for use must be
collected separately and recycled in an
environmentally compatible manner.
9� Declaration of
Conformity
STEINEL Vertrieb GmbH hereby de-
clares that the L 600 CAM conforms to
Directive 2014/53/EU. The full wording
of the EU Declaration of Conformity
is available for downloading from the
following Internet address:
www�steinel�de
10� Manufacturer's
warranty
This STEINEL product has been manu-
factured with great care, tested for prop-
er operation and safety in accordance
with applicable regulations and then
subjected to random sample inspection.
STEINEL guarantees that it is in perfect
condition and proper working order. The
warranty period is 36 months, starting
from the date of sale to the consumer.
We will remedy defects caused by ma-
terial flaws or manufacturing faults. The
warranty will be met by repair or re-
placement of defective parts at our own
discretion. The warranty shall not cov-
er damage to wear parts, damage or
16