AVS Bugflector Instrucciones De Instalación

Bugflector
For proper installation and best possible fit, please read all instructions BEFORE you begin.
For technical assistance or to obtain missing parts, please call Customer Relations at 1-800-241-7219.
Important Safety Information
• CAUTION - Before driving, ensure that the hood shield is properly secured to vehicle.
• Do not use automatic "brush-style" car washes.
• Do not use cleaning solvents of any kind.
• Periodically check all components for tightness.
Contents
NOTE: Actual product may vary from illustration.
Hood Shield
Tools Required
Car Wash Supplies
Preparation Before Painting / Installation
• A trial fit is recommended to ensure proper positioning and fit.
• Check fit of parts before painting as we will not accept the return of modified or painted parts.
• Wash and dry your vehicle to remove any debris and/or dirt from the installation area.
Installation Steps
Open hood.
1
Installation Instructions
- Bugflector II
®
Self tapping screws x4
Clean Towel Flathead Screwdriver
NOTE: Actual application may vary slightly from illustrations.
- Carflector
®
Washer x4
Locate trim pad on center of underside of
hood. Remove and retain (4) fasteners and
2
Page 1 of 3
I - Sheet Number BF58 Rev.A
®
Alcohol Bump On x4
pads x2
Drill Phillips Screwdriver
carefully set aside trim piece.