Technical Specification - Blackstar Amplification STUDIO 10 KT88 El Manual Del Propietario

The stereo jack socket also accomodates connection of headphones to this output,
allowing you to practice silently.
NOTE: For silent practice or recording switch the amp into Standby (8) mode to
silence the internal speaker.
6. Effects Loop Level
The Effects Loop Level switch sets the effects loop to either +4dBV/-10dBV, which
enables you to use it with either professional equipment (+4dBV setting), or with
guitar level effects such as effects pedals (-10dBV setting).
7. Effects Loop Return
Connect the (mono) output of an external effects unit here.
8. Effects Loop Send
Connect the (mono) input of an external effects unit here.
9. Footswitch
The supplied footswitch is connected here. The footswitch enables you to engage
the Overdrive.
10

Technical Specification

Power (RMS): 10 Watts
Valves: 1 x KT88, 1 X ECC83
Weight (kg): 15.4
Dimensions (mm): 473 x 421 x 251
Footswitch: FS-4S included, optional FS-8 for control of Overdrive
and Reverb.
11