Publicidad
Idiomas disponibles
Idiomas disponibles
Voltage tester „Power Probe"
The Power Probe is a tester for general 6,12 and 24 Volt automotive electrical systems.
The voltage tester is used to check common vehicle electrical systems for polarity, short-circuits, interruptions and throughput.
The integrated rocker switch can apply voltage directly to individual vehicle components via the probe tip.
The colour changes of the indicator LED provide information about polarity or circuit interruptions to the user.
The system is protected against short-circuits by an integrated overload protection.
9
Important note!
The voltage tester is only designed for use with 6-24 Volt systems.
The system must never be used with 110/230 Volt mains voltage.
Safety advice:
Please read the operating manual carefully before using the system. The system may only be
used by trained personnel. Improper use can cause damages or short-circuits in vehicle electrical
systems. To avoid this, we recommend that before users perform tests, they consult the correct
circuit diagram or diagnostic procedure. The system may not be used for taking measurements on
electronic steering or control units or on data bus systems.
In all applications, please observe the safety advice and repair instructions of the appropriate
system or vehicle manufacturer.
Publicidad
