Mhouse RT3N Instrucciones Y Advertencias Para La Instalación Y El Uso página 10

• T3 memorised in Mode I on A4 only, makes it possible to control ascent,
stop or descent.
• T4 memorised in Mode II for the Step-By Step command on all the automa-
tions makes it possible to control the ascent or descent of A1 and A2 si-
multaneously, or control A3 or A4 separately; lastly, it will enable the user to
control the opening of the A5 automatic gate.
To memorize the transmitters in Mode II, refer to Tables [D] and [E].
Memorizing the first transmitter
Table [D]
in Mode II
1 As soon as the receiver is powered, 2
long beeps will sound
2 Within 5 seconds, press the desired key
on the transmitter to be memorized and
hold it down until all 3 beeps have
sounded, then release the key
3 Within 3 seconds, press the same key on
the transmitter as many times as the
number corresponding to the desired
command: 1 = Step-By-Step; 2 = Ascent;
3 = Descent; 4 = Stop
4 After approx. 3 seconds you will hear a
number of beeps corresponding to the
selected command
5 Within 2 seconds, press and release the
same key to confirm the programming
The 3 final beeps signal that the new transmitter has been correctly memorized.
During step 4, if you do not hear the number of beeps corresponding to the
desired function, wait 10 seconds before abandoning the procedure, then try
again.
8 – English
Example
X1...X4
X1...X4