BUCK COMMANDER AGC-408 Manual De Instrucciones página 3

BOW HANGER INSTALLATION
INSTALL BOW HANGERS BEFORE MOUNTING THE
CABINET TO THE WALL AND FLOOR.
Assemble the bow hangers to the
cabinet side or to the center partition
with the screw and washer as shown.
To assure that your bows hang properly inside and outside the cabinet, use only
the mounting hole location show.
NOTE: e foam lining you installed will cover some of these mounting
holes. Push the mounting screw through the foam to mount the bow hanger.
Assemble a bow hanger to the inside of the cabinet on the le side in the
location shown.
Assemble a bow hanger to the le side of the center partition in the
location shown.
As an option, you can assemble a bow hanger to the right side of the
partition in the location shown.
You can also mount a bow hanger on the outside of the cabinet in the upper
front mounting hole on the le side. Make sure there is room on the outside
to store and access your bows and equipment.
3
21
40305-1401