BUCK COMMANDER AGC-408 Manual De Instrucciones página 4

OPTIONAL ARROW HOLDER INSTALLATION
For best results, a ach the pair of arrow holders on the inside of the door at the
dimensions shown.
Both holders must have the slots run in the same direction.
Incorrect
e foam arrow holders have an adhesive coating that is covered by a
removable backing. Before removing the backing, mark the location of the
foam arrow holders on the door at the dimensions shown. To remove the
backing, pinch the backing and the foam together in one corner before starting
to remove the backing.
Correct
7 1/4"
[184mm]
20"
[508mm]
You can store up to 12
arrows if you alternate the
arrows as shown.
Insert the 2 hole plugs in
the top if you are not going
to install the optional
accessory cabinet.
INSTALLATION OF SCOPE STAND-OFF
e scope stand-o will function properly for many combinations of guns with
scopes.
Screw the scope stand-o into the pilot hole of the barrel rest.
4
21
40305-1401