Battery pack
charger
Article number
Input
Input power
Output voltage
Output current
Battery type
Recommended
ambient charging
temperature
Storage temperature -25°C - 75°C -25°C - 75°C
Intended Use
This charger is only intended to charge Würth
12V battery packs listed in this manual.
The product is only for use indoors in dry conditions.
The product is not intended to charge any other type
of battery, to be used as a power supply, or for any
other purpose. It should never be used in explosive or
Symbols
Read all safety warnings and all
instructions.
Warning
CE conformity
EurAsian Conformity Mark
ALG 12/3
ALG 12/2
BASIC
BASIC
5705 730
5705 720
000
000
220 - 240V
220 - 240V
50/60 Hz
50/60 Hz
55 W
35 W
12 V DC
12 V DC
3 A
2 A
Lithium-Ion
Lithium-Ion
5°C - 40°C
5°C - 40°C
Class II equipment
For indoor use only.
T2.0A
Time-lag fuse 2.0A
Waste electrical products should
not be disposed of with household
waste. Please recycle where facilities
exist. Check with your local authority
or retailer for recycling advice.
Maintenance and Cleaning
Disconnect the plug from the power
source and/or the battery pack from the
product before making any adjustments,
changing accessories or storing the
product. Such preventive safety measure
reduce the risk of starting the product
accidentally.
Always ensure that ventilation openings
are kept clear of debris.
If the product should fail despite the care taken in
manufacturing and testing procedures, repair should
be carried out by a Würth master service.
In all correspondence and spare parts orders, please
always include the article number given on the type
plate of the product.
The current spare parts list for the product can be
viewed in the Internet under "http://www.wuerth.
com/partsmanager" or requested from your next
Guarantee
For this Würth product, we provide a guarantee in
delivery document). Damage that has occurred will be
corrected by replacement or repair.
Damage caused by normal wear, overloading or
12