MOB MO8852 Manual Del Usuario página 6

(00:00 displayed) the symbol would not disappear.
After exit the setting, press UP to start the timer, the set second
is going down, when it reaches 00, the set minute goes off.
When main part and subordinate part put separately, main part
display humidity, press MODE to to enter timer mode, press SET
to set the minute of timer, after set the second would be 00
When main part and subordinate part put separately, only minute
of timer displayed, when timer works the timer symbol
displayed and twinkling. After they are put together time
displayed with symbol displayed, press MODE three times
to enter timer mode with timer digits displayed.
When timer reaches 00:00, it alarms for 1 minute with backlight
on for 10 seconds, press any key to stop or wait unit it turns off
after 1 minute. If main part and subordinate part are separate,
when timer is out, put them together to stop the alarm,
conversely, if they are put together, when timer is out, separate
them to stop the alarm.
6. Temperature and humidity mode
After power on, it test the temperature automatically, the
temperature scope 0℃ ~ 50℃ (32℉ ~ 122℉). Test period: 30
seconds.
At temperature and humidity display mode, press UP or DOWN to
switch the temperature unit.
When temperature is under 0℃, it display 0℃, when it's upper
50℃, it display 50℃.
Humidity test cope: 20%~95%, test period: 60 seconds.
When humidity is under 20%, it display 20%, when it's upper 95%,
it display 95%.
7. Backlight function
Whenever the units are put together or separate the main part to
subordinate part, the backlight turns on.