Indoor Temperature - AudioSonic CL-1507 Manual De Instrucciones

• Press +/NEXT or -/PREV button to set the Hour, press MODE ENTER button to
confirm and process to next setting. The Minute digits will flash.
• Do the same to set other settings by the sequence of: Minute, Year, Month &
Date, and Temperature Format.
• Note: It will automatically exit to Clock mode if no key is pressed in 10seconds
during the setting mode. During the setting of Month & Date, you can press +/
NEXT or -/PREV button to arrange the displaying sequence as Month & Date or
Date & Month when the small icons M and D are blinking.

indoor temperature

• Once the unit is connected, the indoor temperature will be displayed.
• Press MAX/MIN button to show the MAX or MIN temperature for 5seconds, then
it will automatically turn back to indoor temperature display.
Setting the alarm time
• Two alarm times are available for waking you up.
Setting alarm 1
• In the Clock mode, press MODE ENTER button once to show the Alarm1.
• Press and hold the MODE ENTER button for 2seconds to enter the setting mode.
The Hour digits will flash.
• Press +/NEXT or -/PREV button to set your desired Hour. Press MODE ENTER
button to confirm. The Minute digits will flash.
• Press +/NEXT or -/PREV button to set your desired Minute. Press MODE ENTER
button to confirm. The alarm sound sources icon will flash.
• Press +/NEXT or -/PREV button to choose the alarm sound sources from Beep,
Radio and Melody. Press MODE ENTER button to confirm.
• Note: When Alarm1 is not activated, only the icon 1 is showed in the upper
right, once it is activated, the (Beep), (Radio) or (Melody) icon will be showed. If
the radio is ON during the wake-up time, it will alarm by Beep or Melody sound
and temporally stop the radio. The radio will be resumed after stopping the
alarm or Melody. Alarm 2 will be in the same case.
Setting alarm 2
• In the Clock mode, press MODE ENTER button twice to show the Alarm 2.
• Set Alarm 2 with the same operation as setting Alarm 1.
• Note: When the light is OFF and it is 30 minutes to the alarm time, light will be
turned ON in 6 steps with 5minutes per step to fully brighten up.
to Stop the alarm
• When the alarm time is reached, it will sound by Beep, Radio or Melody
following your preset value.
• Press any button except SNOOZE/SLEEP button to stop the alarm.
• Press SNOOZE/SLEEP button to activate the snooze function. The alarm will
sound again in 5 minutes until you press any button except SNOOZE/SLEEP
button to stop the alarm.
• Note1: The Alarm will sound for 5 minutes. No matter the Alarm is stopped
automatically or manually, the light will be turned off in 5 minutes from the
stopping of the Alarm.
• Note2: In Alarm1 or Alarm2 displaying mode, you can press ON/OFF PRESET
button to turn ON/OFF the alarm.
Sleep function
• In Clock mode, press and hold the SNOOZE/SLEEP button for 2 seconds to turn
on the radio with sleep function; The SLEEP icon will be showed, starting to
count down.
• Note: Pressing and holding the Radio button for 2 seconds will get the same
effect.
• Press and hold the SNOOZE/SLEEP button for 2 seconds to enter the sleep timer
setting mode.
• Press +/NEXT or -/PREV button to adjust the sleep interval between 1-120
minutes. The default value is 60 minutes.
• Press the SNOOZE/SLEEP button to confirm and exit the setting mode.
• Note: When the SLEEP timer counts to 0, the radio will be turned off
automatically.
EN
5