Product Installation And Usage - Klarstein Waterfall Manual De Instrucciones

EN
20

PRODUCT INSTALLATION AND USAGE

Installation method
The product can be used directly after removing the package (without installation)
Usage of various function buttons
The buttons are touch buttons. You can tap the buttons on the operation panel to trigger
the corresponding functions.
1. When the power is turned on for the first time, the buzzer beeps twice and enters
standby mode; except the ON/OFF button, other buttons are invalid.
2. ON/OFF button: in power on state, press this button to turn on/off the device.
After turning on, the system returns to standby mode, and has no output and
display. When the device is first turned on, the wind speed is level 2, and changes
to level after three seconds. The timer is turned off; swing is turned off; pump
absorbing is turned off; power indicator turns on; the wind mode is normal. After
turning off, the state will be saved, but the timer setting won't be saved; if the mode
is sleep wind before turning off, the mode won't be saved, and it will change to
normal wind. In power on state, if there is no button (or remote control) operation
in one minute, the brightness of all LEDs reduces by half; press the button again,
the brightness resumes and performs appropriate action;
3. Speed button: in power on state, rotate this button clockwise to increase the
wind speed from level 1 to level 3; rotate this button counterclockwise to reduce
the wind speed from level 3 to level 1. LED indicator shows the appropriate speed
state.
4. Mode button: the device first enters normal wind mode; press this button to enter
the natural wind mode, press it again to enter sleep wind mode, and press it again
to enter normal wind mode. In natural wind and sleep wind mode. LED turns on
according to setting. In normal wind mode, no LED is lit.
Press the Mode button to switch the wind modes, which run as follows:
Normal wind: high speed, medium speed, low speed
Natural wind: The main motor of the fan performs irregular operation according
to pre-programmed computer program. Combined with the wind speed button, the
natural wind can be set to high, medium and low level to simulate the effect of nature
wind, and make the wind more soft and comfortable. The wind speed LED displays the
corresponding speed, and the natural wind mode indicator turns on.