Publicidad
PH10 PLUS installation and user's guide
http://www.renishaw.com
Autochange racks
Renishaw's autochange racks shown are probe exchange systems available for use with the PH10M PLUS and PH10MQ PLUS probe
heads. Mounted within the CMM's working envelope, the autochange system facilitates fast, automatic probe exchange without the need
for requalification.Fast 'probing to probing' cycles are achieved by the head docking one probe and selecting another. Once calibrated the
highly repeatable autojoint removes the need to requalify after each exchange.
ACR1
ACR1 is a fully integrated autochange system with eight ports. The ACR1 can be mounted vertically and has the ability to change probes
from the end of extension bars.
ACR3
ACR3 is a passive modular autochange rack with four ports and is driven by the motion of the CMM. Two ACR3s can be linked to provide
an eight port system. The ACR3 is mounted on the horizontal Renishaw MRS (modular rail system).
ACR3 is a passive modular autochange rack with four ports and is driven by the motion of the CMM. Two ACR3s can be linked to provide
an eight port system. The ACR3 is mounted on the horizontal Renishaw MRS (modular rail system).
Issued 01 2013
Page 28 of 48
Publicidad
