Publicidad
PH10 PLUS installation and user's guide
http://www.renishaw.com
Introduction
This guide describes the installation and product usage of the PH10 PLUS series of motorised probe heads. This guide gives information
on physical installation and system connections, as well as assistance in fault-finding during the installation of a system.
The components of the PH10 PLUS system are not compatible with PH9 and PH20 system components. No attempt should be made to
connect the PH10 PLUS system components to a PH9 or PH20 system as this will result in damage to the product.
CAUTION: PH10 PLUS must be used in conjunction with the Renishaw PHC10-3 PLUS. No other controller will operate this head.
This guide should be read in conjunction with the PHC10-3 PLUS installation guide (part number H-1000-0077) in order to fully understand
the system's features, capabilities and operation.
Issued 01 2013
Page 9 of 48
Publicidad
