Publicidad
T-Connector Wiring Kit
INSTALLATION INSTRUCTIONS
1. Read instructions thoroughly before beginning.
2. Locate the vehicles tail light wiring harness behind the
rear bumper. The harness will be
located along the inside of the left
(drivers) side frame rail and will
have connectors similar to those
on the T-Connector harness
(fig. 1).
3. Separate the vehicle
connectors, taking care not to damage the locking
tabs. Inspect the connectors for dirt & debris and clean if
necessary.
4. Position the T-Connector harness between the separated
vehicle harness connectors.
Press the T-Connector ends firmly into the vehicle harness
connectors until they lock into place. Take care not to damage
the locking tabs.
5. Confirm correct operation with a test light or by using a
trailer.
6. Route the 4-flat connector and the black box to the center
of the vehicle and secure using cable ties (provided).
Fig. 1
Publicidad
