Setting The Time; Using The Stopwatch - Lotus ILMJS20 Manual De Instrucciones

SETTING THE TIME

1. Pull the crown out to the 1st Click Position.
2.
Turn the crown to set hour and minute hands.
3. When the crown is pushed back to the normal position in synchronization with a time
signal, second hand begins to run.
ILMJS20/55
16
ILMJS20/55

USING THE STOPWATCH

This stopwatch is able to measure and display time in 1second united up to maximum
of 29min 59sec. Stopwatch will stop automatically after running continuously for 30
minutes.
[Measuring time with the stopwatch]
1. Press button "A" to start the stopwatch.
2. The stopwatch can be started and stopped each time button "A" is pressed.
3. Pressing button "B" resets the stopwatch and stopwatch minute and second hands
return to their ZERO positions.
* Button a / B does not function during resetting the stopwatch.
Reset
measurement
Time
Stop
17