Uline H-1114 Manual Del Usuario página 4

UNIT WT PRESET DUAL FUNCTION PRIORITY
You can set the UNIT WT PRESET key to treat either of its
functions (Unit Weight Presets or switch from lb to kg) to
operate as the default function.
0 = Quick press of UNIT WT PRESET key operates
"kg/lb" (Default). Press and hold UNIT WT
PRESET for 3 seconds to operate the Unit
Weight Presets function.
1 = Quick press of UNIT WT PRESET key operates
Unit Weight Presets function (Default). Press
and hold UNIT WT PRESET for 3 seconds to
operate "kg/lb".
1. Press ZERO, then 1, 6.
WEIGHT
SMPL
→ 0←
WT
PC
NET NET
WT
2. Press 0 or 1 to select the desired mode.
3. Press • to exit and save the settings.
TOTAL ACCUM
Set the way the scale shows or indicates totalized values.
0 = After pressing TOTAL ACCUM, display shows
totalized value. After 3 seconds, scale
counts back to zero.
1 = After pressing TOTAL ACCUM, display shows
totalized value. Press CE, scale counts back
to zero.
2 = After pressing TOTAL ACCUM, beeper sounds,
display does not show totalized value.
1. Press ZERO, then 1, 1.
WEIGHT
SMPL
→ 0←
WT
PC
NET NET
WT
2. Press 0, 1 or 2 to select the desired mode.
PAGE 4 OF 18
SETTING FUNCTION MODES CONTINUED
UNIT WEIGHT QUANTITY
M+
X
STABLE
UNIT WEIGHT QUANTITY
M+
X
STABLE
3. you can set the way the Total Accum operates.
0 = TOTAL ACCUM works only when weight is
stable.
1 = TOTAL ACCUM works even when weight is
unstable.
1. Press ZERO, then 1, 4.
WEIGHT
→ 0←
NET NET
2. Press 0 or 1 to select the desired mode.
3. Press • to exit and save the settings.
Pcs Continuous/Zero
You can set TOTAL ACCUM to operate continuously or
only after the scale returns to zero.
0 = After pressing TOTAL ACCUM, scale must
return to zero before TOTAL ACCUM works
again.
1 = After pressing TOTAL ACCUM, it's ready to go
again immediately.
1. Press ZERO, then 1, 5.
WEIGHT
→ 0←
NET NET
2. Press 0 or 1 to select the desired mode.
3. Press • to exit and save the settings.
Pcs
UNIT WEIGHT
SMPL
M+
WT
PC
STABLE
WT
UNIT WEIGHT
SMPL
M+
WT
PC
STABLE
WT
QUANTITY
X
Pcs
QUANTITY
X
Pcs
0613 IH-1114