Sidespray Hose
Handle
3. Installation Checkout
IMPORTANT! Failure to follow these steps could result in a
plugged sidespray.
Verify that the handle is in the closed position and all connections
are tight.
Turn the sidespray counterclockwise to disconnect the sidespray
from the sidespray hose.
Place the sidespray hose in a bucket, then slowly turn on the hot
and cold water supplies.
Slowly turn the handle to the full cold position. Let the cold
water run for 1 minute to flush away any debris.
Slowly turn the handle to the full hot position. Let the hot water
run for 1 minute to flush away any debris.
Turn the handle counterclockwise to the OFF position.
Reattach the sidespray to the sidespray hose.
Check all connections for leaks.
1217379-2-A
Sidespray
6
Off
Cold
Mix
Hot
Kohler Co.