Instruction Manual - flow-med dry-cap uv 3 Manual De Instrucciones

EN INSTRUCTION MANUAL
šDry&Clean mode (2 hours)
The Dry&Clean mode is an automatic program and combines fast
drying with an efficient fan with UV-C light at the beginning and
end of the drying time for perfect hygiene.
Using first time
1. Plug the USB cable into a USB power supply unit (5V/1A) and the round plug into the socket on the back of your
dry-cap uv 3®.
2. Then plug the power supply unit into a mains socket.
• The dry-cap uv 3® is charged in approx. 2.5 hours and ready for operation for
approx. 5 cycles in Dry&Clean mode or about 60 cycles in Clean mode.
ššClean mode (2 minutes)
The Clean mode is a short-term hygiene program and starts the
optimized UV-C light, which effectively eliminates up to 99.9% of
germs, bacteria and fungi present in the household.
2
i LED 3 green blink light
i LED 3 green light