flow-med dry-cap uv 3 Manual De Instrucciones página 5

šOperation Dry&Clean Mode (2 hours)
3. Place the dry-cap uv 3® with the hood over the charging station with the rechargeable hearing aids.
4. Press the left button (Dry&Clean mode) and the care program (drying + UV-C) starts automatically.
• The fast drying by fan is controlled by a microprocessor and runs for 2 hours.
• Ultraviolet light (253,7 nm) eliminates germs and bacteria to 99.9% within 2 minutes.
• After 2 minutes the UV-C light switch off automatically, the drying process continues.
• Within the last 2 minutes of the 2 h drying program, a second UV-C hygiene runs.
• After 2 h the dry-cap uv 3® automatically shutdown to stand-by.
Drying and hygiene are complete, the charging of the hearing aids in the charging station continues and can remain
under the dry-cap uv 3® after the charging station is switched off.
5. Lift the dry-cap uv 3® up and off next to the charging station. Remove the dried and hygienically cleansed hearing aids
from your charging station.
3
i LED 1 light
i LED 1 blink light
i LED 1 light
i LED 1 blink light
i LED 1 switch off