HK Audio PREMIUM PR:O Serie Manual De Instrucciones página 3

Ocultar thumbs Ver también para PREMIUM PR:O Serie:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

PREMIUM PR:O
Passive models
Welcome to the HK Audio family!
Thank you for choosing a brand-name product made by our company. Rest
assured, we engineered and built it with the greatest care so it will serve
you well for many tomorrows to come.
Even if your experience with sound systems runs deep, some things
about this product are sure to be new to you. This is why we ask that you do
not set this manual aside without reading it fi rst. Be sure to keep it in a
safe place for later reference.
Here's wishing you the best sound at every occasion!
Your HK Audio team
Warranty
Use the convenient online registration option at www.hkaudio.com.
http://warranty.hkaudio.com
The registration is only valid if the device is registered within 30 days of
the date of purchase.
HK Audio
Technischer Service
Postfach 1509
66595 St. Wendel, Germany
Fax: +49 6851 905 100
1 Aligning Cabinets with DuoTilt™
The novel integrated DuoTilt™ pole mount allows sound energy to be
utilized far more effi ciently. With two angles of tilt to choose from, 3°
and 7°, the enclosure can be aimed directly at the audience. The cabinet
is stabilized at its center of gravity – no wobbling, unwanted tilting, or
unintentional turning.
Your choice of DuoTilt™ angle – 3° or 7° – depends on the required speaker
height and the size of the room. If you set mid/high units on fully extended
tripods or mounting poles, select 7° to minimize ceiling refl ections.
If you want to address an audience where more listeners are farther away
from the speakers, use the HK Audio DuoTilt™ at the 3° angle.
Mono Tilt 3™ (PR:O 8) off ers one angle of tilt.
2 Connecting Components and Speakers
Speaker cords with a diameter of 2x2.5 sq. mm are recommended for
connecting cabinets, power amps or powered mixing consoles.
Recommended Amplifi er Power Output
Connect amps rated from 600 W @ 4 ohms RMS to 800 W RMS @ 4ohms
per amp channel to power the PREMIUM PR:O cabinets. To have enough
headroom available for dynamic musical signals, the power amp should
deliver peak performance of at least 1,200 W @ 4 ohms per channel.
Note: An electrical connection between the cord and input jack is not
established until the Speakon connector locks into place. Twist the
Speakon connector clock wise until it engages.
2.1 PR:O 8 / 10 X / 12 / 15 / 15 X in Fullrange Mode
Connect the speaker output from the powered mixer or power amp to the
input (IN) of the PR:O 8, PR:O 10 X, PR:O 12, PR:O 15 and PR:O 15 X fullrange
speaker cabinet.
Poweramp
or
Power Mixer
PREMIUM PR:O passive 2.0
3

Publicidad

Tabla de contenido
loading

Tabla de contenido