Operating Conditions - DePuy Synthes FMS 283573 Manual De Instrucciones

PRECAUTIONS
• Electrical safety testing should be performed by a biomedical engineer or other qualified person.
• Read the instructions, cautions, and warnings provided with all FMS VUE System accessories before use. Your sales representative
can advise which accessories are used with the FMS VUE and NEXTRA systems.
INSTRUCTIONS FOR USE
Refer to the appropriate manual for instructions for use with the FMS VUE and NEXTRA Fluid Management and
Tissue Debridement Systems.
FMS NEXTRA Instruction Manual - 109652
FMS VUE Fluid Management and Tissue Debridement System Operator's Manual - 110665
CLEANING AND DECONTAMINATION
After each operation, clean the foot pedal and the power cord with a Glutaraldehyde disinfectant such as CIDEX
and used as per manufacturer's instructions.
1. Prepare the disinfectant solution per manufacturer instructions.
2. Wipe the surface of the Foot Pedal with a cloth, swab or gauze pad soaked in disinfectant solution.
3. Let the disinfectant stay on all device areas for 19-20 minutes.
4. Rinse thoroughly in running water.
5. Allow the Foot Pedal to drain and dry thoroughly.
Caution:
DO NOT AUTOCLAVE
Do not twist the cable when storing. Do not unplug instrument by pulling on cable.
MAINTENANCE
Inspect all equipment and cables periodically for wear. If damage is noted, replace or return to Repair Service Center.
Any repairs must be performed by a qualified Biomedical Engineer.
STORAGE
Room temperature: -10°C (14°F) to +50°C (122°F)
Relative humidity: 10% to 90% condensation included.
Atmospheric pressure: between 500 hPa & 1060 hPa.

OPERATING CONDITIONS

Temperatures: +10°C (50°F) to +40°C (104°F)*
Relative humidity: 30% to 75%
Atmospheric pressure: between 700 hPa & 1060 hPa
1
Reverse Pedal
2
Flow+™ Button
3
Oscillate Pedal
4
BLOODSTOP™ Button
5
Forward Pedal
3
OPA solution prepared
®