Radio; Tuning In A Station - SSANGYONG AGC-9145BY/WY Manual Do Usuário

Radio

▶ Tuning in a station

Turn on the radio
●
1
Press BAND/AS button repeatedly to select the
band.
FM1 → FM2 → AM → FM1 → ....
Tuning a station manually
●
2
Press TUNE
to a desired frequency.
Tuning a station automatically
●
3
Press TUNE
seconds, then release.
Seeking will start.
The tuning automatically stops at the stations whose
signals can be received, and the station are received.
To quickly scan a station
●
4
Press SCAN/INF button to start tuning for a
station.
The unit will go to a station, play for 5 seconds, and
then go to the next station.
When the unit tunes in to the desired station, press
SCAN/INF button to stop scanning.
Note
During reception of stereo stations the "ST" indicator is on.
◆
When tuning in stations while driving, use preset number button to prevent
◆
accidents.
buttons repeatedly to tune
buttons for more 2
▶ Storing a station manually
You can preset 6 stations for each band (FM1, FM2 and AM).
◆
1
Follow steps 1 to 4 in "Tuning in a station" to tune to the
frequency you wish to preset.
2
Press and hold Number [ 1 to 6
~
more 2 seconds to select the preset number.
The frequency is stored in the selected preset number
and you will hear a beep.
To preset another station, repeat these steps.
Note
If you try to store another station in the same preset number, the previously
◆
stored station will be replaced.
AGC-9145BY/WY AGC-9146BA/WA
] buttons for
D+
9