Usb/Aux Player; Playing A Usb Device - SSANGYONG AGC-9145BY/WY Manual Do Usuário

USB/AUX player

▶ Playing a USB device

By connecting a USB device to the USB input port on the unit,
you can listen on your car speakers, while controlling the USB
device from the unit.
1
Press and hold POWER [
to turn the unit off.
2
Connect the USB storage
device with MP3/WMA files
to be played to the USB
input terminal.
The unit turn power on, then
playback starts automatically
with "USB" indication after
recognizing the data of the
USB storage device.
3
When the USB storage device is
already connected, press MEDIA
button repeatedly until 'USB'
appears.
The USB playback will starts
automatically.
You can change the volume, play mode
and track selection by using buttons on
control panel.
(Refer to 'MP3[WMA]/CD player' section)
18
AGC-9145BY/WY AGC-9146BA/WA
▶ Precautions for handling USB device
When using the external USB device,
●
make sure to keep the device disconnected
and connect only some time after turning
on the vehicle ignition. The USB device
] button
may be damaged if the USB device
already connected when the ignition is
turned on. (USB device is not an electronic
automotive component)
Some USB devices may not operate
●
properly because of compatibility issues.
Check that the external device is supported
by the device before starting use.
The device will only recognize USB
●
devices formatted in FAT 12/16/32.
When formatting the external USB device,
the device may not properly recognize a
Byte/Sector selection other than 512Byte
or 2048Byte.
Avoid the contact of bodily parts and
●
foreign substances with the USB connector.
Repeatedly connecting/disconnecting the
●
USB in a short period of time may cause
damage to the device.
When disconnecting the USB, an
●
abnormal sound may occur occasionally.
Abruptly disconnecting the external USB
●
device while the USB is operating may
cause the device to be damaged or function
abnormally.
Make sure to disconnect the USB device
only after the audio power is turned off or
when the audio is operating in a different
mode.
The amount of time required to recognize
●
the external USB device may differ
depending on the type, size, or file formats
stored on the USB. Such differences in the
required time are not indications of
malfunction. Please wait the period of time
required to recognize the device.
The device supports only USB devices
●
used to play music files.
Do not use the USB I/F to charge batteries
●
or USB accessories which generate heat.
Such acts may lead to deteriorated
performance or damage to the device.
The device may not recognize the USB
●
device if separately purchased USB hubs
and extension cables are being used.
In the case of high capacity USB devices,
●
there are instances where the logical drives
are partitioned for user convenience. In this
case, it will only be possible to play the
USB music in the top level drive.
When using partitioned drives, save the
songs you wish to play on the device only
in the top-level logical drive. In addition,
certain USB devices are configured with a
separate drive used to install application
programs and it may not be possible to
play songs from such drives for the reasons
as described above.
The device may not support normal
●
operation when using formats such as
HDD Type, CF, or SD Memory.
The device will not support files locked by
●
DRM (Digital Rights Management).