Instructions For Use With Wood; Use With Smokeless Fuel - FRANCO BELGE Belfort Instrucciones Para El Instalador

"BELFORT" - ref. 134 04 11
1

3.2. Instructions for use with wood

3.2.1. Lighting
Figure 8
•
Slide the top air control (rep. B1) to the right. Open the
lower spin wheel (rep. C1).
•
Lay firelighters or rolled up newspapers on the grate
with a reasonable quantity, if necessary, of dry kindling
wood. Place 2 or 3 small logs on top.
•
Light the newspaper or firelighters using a long taper
and close the door.
•
When the fire is burning fiercely, add further logs of a
diameter up to 10 cm.
•
When the stove body is very hot, close the lower spin
wheel.
•
The burning rate can now be lowered by moving the
top air control to the left.
•
The airwash system works with the top airslide. When
the top airslide is full open the system works at its
strongest efficiency.
•
The more closed down the airslide is, the less effective
the airwash will be (when shut down completely, the
airwash system can not function).
3.2.2. Re-fuelling
Figure 8
- Slide the top air control (rep. B1) to the right. Open the
lower spin wheel (rep. C1).
- Open the glass door and add logs.
- Leave the lower spin wheel open for a few minutes to
allow the initial volatiles in the wood to burn.
- Close the lower spin wheel.

3.3. Use with smokeless fuel

3.3.1. Lighting
Figure 8
- Slide the top air control (rep. B1) to the right. Open the
lower spin wheel.
Technical manual "1174"
2
1
Figure 9 - Removing the fuel retainer
- Lay firelighters or rolled up newspapers on the grate
with a reasonable quantity, if necessary, of dry kindling
wood. Place a small quantity of solid fuel on top.
- Light the newspaper or firelighters using a long taper
and close the door.
- When the fire is burning fiercely, add further fuel.
- When the stove body is hot, close the top air control by
sliding to the left.
- The burning rate can now be adjusted by rotating the
lower spin wheel.
- The nominal output is achieved with secondary air
closed and primary air (rep. C, figure 8, page 8)
opened at 50 %.
- The airwash system works with the top airslide. When
the top airslide is full open the system works at its
strongest efficiency.
- The more closed down the airslide is, the less effective
the airwash will be (when shut down completely, the
airwash system can not function).
2
1
2
1 Oscillating grate
Figure 10 - Mounting the oscillating grate
and the ash tray
Instructions for user
2 Ash tray
9