First Commissioning (All Models) - auna Belle Epoque 1908 Manual Del Usuario

EN
30

FIRST COMMISSIONING (ALL MODELS)

• Carefully remove the unit from the box and remove all packing material.
• Unwind the mains cable along its entire length.
• Unwind the FM antenna along its entire length / extend the telescopic
antenna.
• Place the unit on a stable, level surface so that you can easily reach a
plug socket and the unit is not in direct sunlight or near sources of heat,
dust, moisture, humidity or strong magnetic fields.
• Lift the protective cover of the record player. This is provided with a
transport safety screw. To make the turntable operable, turn them
clockwise with a coin or screwdriver.
Transport safety screw
1
Tone arm lock
2
• Remove the plastic needle cover by sliding it in the direction of the
arrow.
• Remove the twisted wire that was attached to the tone arm for
transport.
• Release the locking lever of the arm.
• Plug the power plug into the mains socket.
Needle cover
3