Resetting The Number Of Control Units (Basic Distribution); Resetting The "Basic" Distribution - Bosch rexroth 3842 559 921 Manual De Instrucciones

12.4 Resetting the number of control units (basic distribution)

Button / display
or
P17
Button [1]
Button [1]

12.5 Resetting the "basic" distribution

Reset if the distribution no longer functions properly. During reset,
the system is also checked for newly connected controls.
Button / display
or
P17
Button [1]
or
P91
Button [1]
Instructions
push shortly four times in a row
A tone sequence resounds and "PXX" is shown in the display
(A)
Push to select a menu item
Distribution menu
Push to select menu item
The display shows "P90"
Push to reset the number of connected control units to 1.
Upon the next operation, the distribution will no automatically
detect the number of connected control units.
Instructions
push shortly four times in a row
A tone sequence resounds and "PXX" is shown in the display
(A)
Push to select a menu item
Distribution menu
Push to select menu item
The display shows "P90"
Push to select a menu item
Reset the Basic distribution
Push to restart the stroke.
The stroke now continues the operation.
3 842 559 935/2019-08, MPS: Control unit, Bosch Rexroth AG
Troubleshooting 27/30