Publicidad
Idiomas disponibles
Idiomas disponibles
* CAUTION: ALWAYS
THE BOOT OR
HATCHBACK).
VEHICLE TRIM.
- The straps must be as taut as possible and never twisted. Progressively tighten each strap alternately and
equally. Make sure that the bike rack is centred and securely in place whilst doing so.
- Make sure that the rubber pads are in firm contact with your vehicle's bodywork.
3. Loading
bikes
on the bike
A.
Load bikes in alternating directions on the plastic cradles so as to have the lowest possible centre
of gravity.
B.
Secure the bikes to the bike rack with the rubber straps Also bikes holder can be rotaded to the
best angle for mounting bikes
Make sure that the bikes are not touching your vehicle's bodywork. To prevent the bikes from
rubbing against the bike rack, insert the split foam cushions.
C.
After loading bikes on the bike rack, retighten all the straps (5, 6, 7) and tie the excess lengths into
tight knots at the bottoms of the loops to prevent them from
flapping in the wind.
FASTEN THE
STRAPS
TO
NEVER FASTEN THEM TO
rack
X3
METAL EDGES ON YOUR VEHICLE (GENERALLY
HATCHBACK WINDOWS, RUBBER/PLASTIC PARTS
16
X3
THE INSIDE OF
OR
X4
Publicidad
