INSTRUCTIONS FOR USE
Engine number
188A9.000, 199A3.000
199B1.000
199A2.000, 169A1.000
199A9.000
188A8.000
199B2.000
223A9.000
199A3.000
169A1.000 (FD4) / BAAA/B
Z13DT, Z13DTH, Z13DTJ
Safety Precautions - Please read
• Disconnect the battery earth leads (check radio code is available)
• Remove spark or glow plugs to make the engine turn easier
• Do not use cleaning fluids on belts, sprockets or rollers
• Always make a note of the route of the auxiliary drive belt before removal
• Turn the engine in the normal direction (clockwise unless stated otherwise)
• Do not turn the camshaft, crankshaft or diesel injection pump once the timing chain has been removed (unless
specifically stated)
• Do not use the timing chain to lock the engine when slackening or tightening crankshaft pulley bolts
• Do not turn the crankshaft or camshaft when the timing belt/chain has been removed
• Mark the direction of the chain before removing
• It is always recommended to turn the engine slowly, by hand and to re-check the camshaft and crankshaft
timing positions.
• Crankshafts and Camshafts may only be turned with the chain drive mechanism fully installed.
• Do not turn crankshaft via camshaft or other gears
• Check the diesel injection pump timing after replacing the chain
• Observe all tightening torques
• Always refer to the vehicle manufacturer's service manual or a suitable proprietary instruction book
• Incorrect or out of phase engine timing can result in damage to the valves
• It is always recommended to turn the engine slowly, by hand, and to re-check the camshaft and crankshaft
timing positions
1 871 000 900;
1 860 985 000;
EN-46785;
EN-46781;
09912 38300
303-1472;
09917 68610
●
●
●
●
●
●
●
●
●
●
●
OEM item number
1 871 000 200;
1 870 900 300;
KM-661-C;
KM-662-C;
303-1469
303-1468
●
●
●
●
●
●
●
●
●
EN
1 870 900 400
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
5