Steren MUL-052 Manual De Instrucciones página 14

IMPORTANT
Antes de utilizar su nuevo Kit C
Before using your new Data hold digital multimeter, please
read the following recommendations.
NEVER apply voltage or current that exceeds the maximum
specifications of measurement of the multimeter.
CAUTION when you are working with high voltages.
NO MEASURE voltages higher than 500V
NEVER connect the testing cables to a voltage source, if the
switch is in the range of:
Current, Resistance, Test diode. Doing so may damage the
meter
ALWAYS discharge the capacitors before measuring.
ALWAYS place the function switch to OFF when you
do not use the multimeter.
ENGLISH-02