Important Precautions - Christie QuadHD84 Guia De Inicio Rapido

Important Precautions

Please read these safety precautions carefully before using the display.
Failure to follow those warnings may result in death, serious injury
Warning
or damage to the display or other property.
Electrical Power Related Precautions
Warning
n Use only the power cord supplied with the unit or another manufacturer's authorized cord.
- Failure to do so may result in fire or electrical shock or damage to the display.
n Use only a properly grounded plug and receptacle.
- If you do not, you may be electrocuted or injured. Or the display might be damaged.
n Do not use a damaged or loose plug.
- This may cause electrical shock or fire.
n Operate the display only from a power source (i.e. voltage) indicated in the product
specification.
- Otherwise, the display can be damaged, fire can occur or you may be electrocuted. If you are not
sure what type of power supply you have, consult a certified electrician.
n In the presence of thunder and lightning, never touch the power cord and signal cable because
it can be very dangerous.
- It can cause electric shock.
n Do not connect several extension cords, electrical appliances or electrical heaters to a single
outlet. Use a power bar with a grounding terminal designed for exclusive use with the display.
- A fire can break out due to overheating.
n Do not touch the power plug with wet hands. Additionally, if the cord pin is wet or covered with
dust, dry the power plug completely or wipe dust off before plugging in the cord.
- You may be electrocuted due to excess moisture.
n If you do not intend to use the display for a long time, unplug the power cord from the display.
- Covering dust can cause a fire, or insulation deterioration can cause electric leakage, electric shock
or fire.
n Insert the power plug firmly so it cannot come loose.
- A loose connection can cause fire. Hold the plug when pulling out the power cord.
n Do not pull the plug out by the wire. Do not bend the power cord with excessive force or put
heavy objects on the power cord.
- The power line can be damaged, which may cause electric shock or fire.
n Do not insert metal or other conductive materials into the display openings. Additionally, do
not touch the power cord right after plugging the cable into the wall input terminal.
- You may be electrocuted.
n The power supply cord is used as the main disconnection device. The socket-outlet shall be
installed near the equipment and shall be easily accessible.
n Do not unplug the power cord while the display is in use.
- Electrical shock can damage the product.
n As long as this unit is connected to the AC wall outlet, it is not disconnected from the AC
power source even if the unit is turned off.
1 QuadHD84 Quick Start Guide
020-000672-01 Rev. 1 (10-2013)