Turning Off The Projector; How To Operate The On-Screen Menu - Christie LX505 Guía De Preparación

Enter a PIN code
Use the Point ▲▼ buttons to enter a number. Press the Point ► button to fix the number and move
the red frame pointer to the next box. The number changes to
the Point ◄ button to move the pointer to the number you want to correct, and then enter the correct
number.
Repeat this step to complete entering a four-digit number.
After entering the four-digit number, move the pointer to Set. Press the SELECT button so that you
can start to operate the projector.
If you entered an incorrect PIN code, PIN code and the number (
Enter the correct PIN code all over again.

Turning Off the Projector

1
Press the ON/STAND-BY button on the side control or the STAND-BY button on the remote
control, and Power off? appears on the screen.
2
Press the ON/STAND-BY button on the side control or the STAND-BY button on the remote
control again to turn off the projector. The LAMP indicator lights bright and the POWER indicator
turns off. After the projector is turned off, the cooling fans operate for 90 seconds. You cannot turn
on the projector during this cooling down period.
3
When the projector has cooled down enough, the POWER indicator lights green and then you
can turn on the projector.
Note:
Do not put the projector in a case before the projector is cooled enough.

How to Operate the On-Screen Menu

The projector can be adjusted or set via the
On-Screen Menu. For each adjustment and setting
procedure, refer to the respective sections in this
manual.
1
Press the MENU button on the side control
or the remote control to display the On-
Screen Menu.
2
Use the Point
▲▼
select a main menu item. Press the Point
or the SELECT button to access the
►
submenu items. (The selected item is
highlighted in orange.)
3
Use the Point
▲▼
desired submenu item and press the
SELECT button to set or access the selected
item.
4
Use the Point
▲▼◄►
the setting or switch between each option
and press SELECT button to activate it and
return to the submenu.
5
Press the Point button to return to the
◄
main menu. Press the MENU button again to
exit the On-Screen Menu.
LX505/605
buttons to highlight or
buttons to select the
buttons to adjust
. If you fixed an incorrect number, use
On-Screen Menu
Point
or
►
The currently set item
SELECT
is check marked.
button
Network
16
Setup Guide
020-000540-01 Rev. 1 (11-2010)
) will turn red for a moment.
Standard
Real
Image 1
Image 2
Image 3
Image 4
Image 5
Image 6
Image 7
Image 8
Image 9
Image 10
The selected item is
highlighted in orange.
Standard
Real
Image 1
Image 2
Image 3
Image 4
Image 5
Image 6
Image 7
Image 8
Image 9
Image 10