Turning Off The Projector - Christie DHD800 Guía De Referencia Rápida

Turning Off the Projector

Press the ON/STAND-BY button on the side control
1
or on the remote control, and "Power off?" appears
on the screen.
2
Press the ON/STAND-BY button on the side control
or on the remote control again to turn off the
projector. The LAMP indicator lights bright and the
POWER indicator turns off. After the projector is
turned off, the cooling fans operate. You cannot turn
on the projector during this cooling down period.
When the projector has cooled down enough, the
3
POWER indicator lights green and then you can
turn on the projector. To turn off the MAIN ON/OFF
Switch, wait until the projector is completely cooled
down.
4
Unplug the AC power cord from the AC outlet.
TO MAINTAIN THE LIFE OF THE LAMP , ONCE YOU
TURN THE PROJECTOR ON, WAIT AT LEAST FIVE
MINUTES BEFORE TURNING IT OFF .
DO NOT UNPLUG THE AC POWER CORD WHILE
COOLING FANS ARE RUNNING OR BEFORE THE
POWER INDICATOR LIGHTS GREEN AGAIN.
OTHERWISE IT WILL RESULT IN SHORTENING OF
THE LAMP LIFE.
✔
Note:
• The running speed of cooling fans is changed
according to the temperature inside the projector.
• Do not put the projector in a case before the
projector is cooled enough.
• The projector cannot be turned on during the
cooling period with the POWER indicator turned off.
You can turn it on again after the POWER indicator
becomes green again.
"Power off?" disappears after 4 seconds.
- 17 -
DHD800 Setup Guide
020-000247-02 Rev. 1 (01-2012)