Kohler K-13680 Manual Del Usuario página 5

Mounting
Tab
Optional 2"x4"
Cross Framing
2-4 Fasteners
Required per
Tab
3/8"
N.P.T.
Supply
1. Install the Wall-Mount Box
Bend out the appropriate tab on the wall-mount box for
mounting to framing. Remove the bottom tab in the box to allow
easier alignment of flush pipe to urinal connection.
Situate the wall-mount box so the supply line aligns with a hole
on the left or right side of the box. Nail or screw the box to
support framing.
Mount the urinal and make the urinal drain connections per the
urinal manufacturers installation instructions. Do not make flush
pipe connection yet.
Apply thread sealant to the supply pipe. Place the stop assembly
into the wall-mount box, and thread the stop assembly onto the
supply pipe.
Orient the shut-off valve handle on the stop assembly so the
handle may be accessed from the front of the box. Place the
screen (domed side down) into the shut-off assembly.
Kohler Co.
3/8"
N.P.T.
Supply
Shut-Off Handle
Stop
Assembly
5
Screen
111769-2-AB