Genibus; Service; Maintenance; Replacement Of Io - Grundfos IO 351 Instrucciones De Instalación Y Funcionamiento

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 59

9. GENIbus

CU 351 and IO 351 and E-pumps communicate by
means of GENIbus.

10. Service

IO 351 cannot be serviced. If the module is faulty, it
must be replaced. See section 12. Replacement of
IO 351.

11. Maintenance

The IO 351 is maintenance-free during normal use
and operation. IO 351 must only be cleaned with a
dust-free cloth.

12. Replacement of IO 351

1. Switch off the power supply to the IO 351.
2. Switch off the power supply to components with
external supply.
3. Mark the individual conductors with the numbers
of the corresponding terminals.
4. Disconnect all conductors.
5. Pull the locking tabs free of the rail, see fig. 9.
The module can now be lifted off the rail.
6. Mount the new IO 351, see section
Fig. 9
Rail locking tabs

13. Dimensions

Fig. 10

14. Disposal

This product or parts of it must be disposed of in an
environmentally sound way:
1. Use the public or private waste collection service.
2. If this is not possible, contact the nearest
Grundfos company or service workshop.
3.4
Mounting.
waste disposal authorities. The separate collection
and recycling of such products will help protect the
environment and human health.
Dimensional sketch
The crossed-out wheelie bin symbol on
a product means that it must be
disposed of separately from household
waste. When a product marked with this
symbol reaches its end of life, take it to a
collection point designated by the local
13

Publicidad

Tabla de contenido
loading

Tabla de contenido