Sony MEX-BT31PW Manual De Instrucciones página 20

Operating the Bluetooth
functions
1 Press .
The call menu appears.
2
Rotate the control dial until the desired
item appears, then press it.
3
Press
The source returns to the Bluetooth
phone.
* For PAIRING, REDIAL, VOICE DIAL and BT
SIGNL settings, step 3 is not necessary.
The following items can be set:
PAIRING* (page 20)
1
PHONEBOOK (page 23)
REDIAL (page 24)
RECENT CALL (page 23)
VOICE DIAL (page 25)
DIAL NUMBER (page 24)
RINGTONE*
Selects whether this unit or the
connected cellular phone outputs the
ringtone: "1 (this unit)"- "2 (cellular
phone)."
AUTO ANS*
Sets this unit to answer an incoming call
automatically: "OFF"-"1 (about 3
seconds)"-"2 (about 10 seconds)."
BT SIGNL* (Bluetooth Signal) (page 21, 22)
1
BT INIT* (Bluetooth Initialize) (page 27)
3
*1 You can also select these items by pressing
 and rotating the control dial to
select "BT."
*2 Depending on the cellular phone, this unit's
ringtone may be output even if set to "2
(cellular phone)."
*3 Appears on the setup menu when the unit is
turned off.
20
(BACK)*.
*
1 2
(Auto Answer)
1
Pairing
The Bluetooth device (cellular phone, audio
device, etc.) and this unit need to be
"paired" before use between each other via
the Bluetooth function.
Tips
• For details on pairing for a Bluetooth device,
refer to the operating instructions supplied with
the device.
• You can pair up to 9 Bluetooth devices with this
unit.
1
Place the Bluetooth device within 1 m
(3 ft) of this unit.
Press  and rotate the control
2
dial until "PAIRING" appears, then
press it.
The unit enters pairing standby mode.
3
Set the Bluetooth device to search for
this unit.
A list of detected devices appears in the
display of the device to be connected.
This unit is displayed as "Sony
Automotive" on the device to be
connected.
Flashing