5455060-Winkelschl-man_a 31.01.12 14:09 Seite 91
• Ensure that grinding tools are
mounted according to the
manufacturer's directions.
• Always use spacers or shims if these
are supplied with the grinding tool or
if they are specified.
• Ensure that the grinding tool is correctly
mounted and secured before starting
work. Allow the machine to run for 30
sec. in a safe position beforehand. Stop
work immediately if unusual vibrations
occur or other deficiencies are noticed.
In such a case, check the machine
carefully to determine the cause.
• Never use separate reducing sleeves
or adapters to fit grinding disks with
large holes.
• With grinding tools with thread insert,
ensure that the thread is long enough
to take the full length of the spindle.
• Ensure that flying sparks do not cause
danger, e.g. to other persons or by
igniting inflammable substances.
• During dusty work, ensure that the
ventilation slits are kept free. If dust
has to be removed, first disconnect the
power tool from the power supply. Use
non-metallic objects and avoid
damaging interior parts of the machine.
• The disk continues to run after the
machine is switched off. Do not lay
the machine aside until the disk has
come to rest.
• Always protect eyes and ears.
• Other personal safety equipment, e.g.
dust mask, gloves, helmet and clothing
(e.g. apron) should also be worn.
This unit may not be used by people
(including children) with reduced physical,
sensory or mental capacities, with a lack
of experience and without the appropriate
knowledge, unless they are supervised by
someone who is responsible for their
safety or have been instructed by such a
person with regard to how the unit is to
be operated. Children should be
supervised to ensure that they do not
play with the device.
Safety symbols
The symbols on the housing have the
following meanings:
Do not dispose of with
domestic waste!
Important! Observe
operating instructions!
Wear goggles.
Use ear defenders
„Tested Safety" voluntary
quality mark
Housing is double insulated
CE Mark (conformity to
European safety standards)
Safety standard mark for
Croatia
91