5455060-Winkelschl-man_a 31.01.12 14:09 Seite 93
Always ensure that the tools are in good
condition, correctly mounted and able to
turn freely. The trial run should last
approx. 30 sec.
9 – Mode of operation
• Always place the workpiece on a firm
surface before starting.
• Observe rotation direction and
function
• The distance between the user and
the machine should be as great as
possible.
• Avoid jolting the workpiece.
CAUTION! Never machine
material containing asbestos.
CAUTION! Do not cut wet
material.
Roughing
Hold the machine at an angle of 30° to
40° to the workpiece. Move the machine
back and forward with moderate
pressure.
10 – Maintenance and
environmental
protection
CAUTION! Before any
maintenance working on the
appliance, unplug it from the mains.
Remove dust regularly from machine
and ventilation slits. Clean the case only
with a damp cloth – Do not use
solvents. Then dry well.
CAUTION! Conductive metallic
dust may impair the function of
the machine.
When working frequently with metals,
blow the ventilation slots out regularly
with compressed air and if necessary
install a safety cut-out switch (FI).
Replacing the carbon brushes
The control LED (13) informs you about
the state of the carbon brushes.
Green light: The carbon brushes are
intact. Control light turns to red: The
carbon brushes are worn and need to
be replaced.
Carbon brushes under the guard (10)
must be replaced in pairs by a
specialist. Remove dust on the contacts
with a brush or compressed air.
CAUTION! Electrical and battery
operated units that no longer work
should not be disposed of in the
household waste! They are to be
collected separately, in
accordance with the
2002/96 EC directive for
the disposal of electrical
and electronic waste, and
sent for proper and
environ mentally-friendly
recycling.
Please discard power tools no longer
usable at a local collection point.
Collection and disposal of packaging
materials separately by types complying
with local rules and regulations. For
details, please contact your municipal
authority concerned.
93