Cleaning And Maintenance; Cleaning The Appliance - Imetec PIUMA CORDLESS N4001 Manual De Instrucciones

noTe:
1. a new appliance can develop odours the first few times it is used. These
odours are harmless and disappear shortly afterwards. ventilate the room.
2. The transparent walls may become opaque with use.
en
• When you have finished using the appliance, press the ON/OFF button (11) to switch
it off.
Warning! always disconnect the appliance from the mains
supply before cleaning or performing maintenance.
Warning! before any maintenance let the appliance cool
down completely.
caUTion! periodicaly verify that filters and the inlet opening
are not clogged.

cleaning The appliance

• Detach the feeder (4) from the charging contact (3) [Fig. D1].
• Switch the appliance off before cleaning it.
• When necessary, clean the appliance with a damp cloth.
caUTion! Do noT use solvents or other aggressive or
abrasive detergents in order not to damage the appliance
surfaces.
cleaning The mUlTi-sUrFace brUsh (5)
With the motor ON, rub the lower part of the brush with your hand to remove the dust and
fluff, which will be drawn.
cleaning The DUsT collecTion sYsTem (7)
caUTion! empty the dust container (7a) and clean the
filters (7a, 7b, 7c) after every use in order not to damage
the appliance.
noTe: never fill the compartment above the maX level (7D) allowed.
noTe: a safety device prevents inserting the dust container (7a) if the filtering
system (7b+7c) is not inserted or inserted incorrectly.
Clean the dust collection system following the instructions below and paying attention to the
figures in the illustrative guide.
16

cleaning anD mainTenance