Problems And Solutions; Disposal; Disposing Of The Batteries - Imetec PIUMA CORDLESS N4001 Manual De Instrucciones

PRObLEM
en
The appliance does not go
on.
The appliance switches off
during use and does not
switch back on again.
The vacuum cleaner does
not suction well.
The product is packaged in recyclable materials. Dispose of packaging in accordance with the
environmental protection standards.
Pursuant to Art. 26 of Italian Legislative Decree no. 49 of 14 March 2014 "Implementation of
Directive 2012/19/EU on waste electrical and electronic equipment (WEEE)", the crossed
bin symbol on the appliance or its packaging indicates that the product must be disposed of
separately from other waste at the end of its useful life.
The user must therefore take the appliance to an appropriate recycling centre for electrical and
electronic equipment.
Alternatively, instead of handling the disposal, the appliance can be handed over to the retailer when
a new, equivalent appliance is purchased.
retailers of electronic products having a sales area of at least 400 m
products that are to be disposed of measuring less than 25 cm, free of charge and with no obligation
to buy. Appropriate separate collection for the subsequent procedure for the decommissioned
appliance for recycling, which includes treatment and environmentally friendly disposal helps prevent
adverse effects on the environment and health and promotes reusing and/or recycling materials that
the appliance consists of.

Disposing oF The baTTeries

This product contains a rechargeable Li-ion type battery.
remove the batteries from the appliance before disposing of it.
Taking The baTTerY oUT
aTTenTion! Disconnect the power plug before removing
the batteries.
18

problems anD solUTions

• Check whether the battery is charged.
• Make sure the plug is disconnected (4) from the socket. When the
plug is connected to the socket, a battery protection system will
stop the appliance from starting up.
• Make sure that the ON/OFF switch (11) has been pressed.
• The battery is flat. Charge the battery.
• If the problem continues, the battery needs to be replaced.
Contact a technical assistance centre.
• The dust collection system is full: empty the dust collection
compartment (7A).
• The filter is clogged: clean or replace the filter (7C).
• The filter is not fastened correctly: ensure the filter (7C) is fitted
correctly.

DISPOSAL

solUTion
can also be handed electronic
2